AUMA SA 16.1 - Display Type of Seating; Change Seating Mode Procedure

6. View or edit?
Display seating mode: continue with 7.
Change seating mode: continue with 10.
Display type of seating:
7.
Press .
➥
Display indicates:
VIEW M1100
OPEN POSITION
CLOSED POSITION
VIEW M1101
OPEN POSITION
CLOSED POSITION
Use and to select between OPEN POSITION and CLOSED POSITION.
8.
Press .
➥
Display indicates:
VIEW
OPEN POSITION
LIMIT
C:ESC
VIEW
CLOSED POSITION
LIMIT
C:ESC
Use and to also select here between OPEN POSITION and CLOSED
POSITION.
9.
Return to the VIEW/EDIT menu:
→
Press C twice.
Change seating mode:
10.
Press .
➥
Display indicates:
SEATING MODE M111
VIEW
EDIT
11.
Press .
➥
Display indicates:
ENTER PASSWORD
0 * * *
:EDIT :OK C:ESC
40
SA 07.1 – SA 16.1/SAR 07.1 – SAR 16.1 Control unit: electromechanic
Commissioning (basic settings) AC 01.1 Intrusive Modbus RTU