AUMA SA-UW User Manual

306.1.1. Operating the actuator from local controls
316.1.2. Actuator operation from remote
316.2. Menu navigation via push buttons (for settings and indications)
326.2.1. Menu layout and navigation
336.3. User level, password
346.3.1. Password entry
346.3.2. Password change
356.4. Language in the display
356.4.1. Language change
367. Indications..............................................................................................................................
367.1. Indications during commissioning
367.2. Indications in the display
377.2.1. Feedback signals from actuator and valve
397.2.2. Status indications according to AUMA classification
407.2.3. Status indications according to NAMUR recommendation
427.3. Indication lights of local controls
438. Signals (output signals).........................................................................................................
438.1. Signals via Profinet
438.2. Status signals via output contacts (digital outputs)
438.2.1. Assignment of outputs
438.2.2. Coding the outputs
438.3. Analogue signals (analogue outputs)
459. Commissioning (basic settings)...........................................................................................
459.1. Type of seating: set
469.2. Torque switching: set
489.3. Limit switching: set
509.4. Test run
509.4.1. Direction of rotation: check
509.4.2. Limit switching: check
5210. Corrective action....................................................................................................................
5210.1. Faults during commissioning
5210.2. Fault indications and warning indications
5610.3. Fuses
5610.3.1. Fuses within the actuator controls
5710.3.2. Motor protection (thermal monitoring)
5811. Servicing and maintenance...................................................................................................
5811.1. Preventive measures for servicing and safe operation
5811.2. Maintenance
5811.3. Disposal and recycling
5912. Technical data.........................................................................................................................
5912.1. Technical data Multi-turn actuators
6012.2. Technical data Actuator controls
6613. Spare parts.............................................................................................................................
6613.1. Multi-turn actuator SAV 07.2-UW – SAV 16.2-UW/SARV 07.2-UW – SARV 16.2-UW
6813.2. Stellantriebs-Steuerung AC 01.2 mit Elektroanschluss SF
7013.3. Wall bracket
74Index........................................................................................................................................
3
SA 07.2-UW – SA 16.2-UW / SAR 07.2-UW – SAR 16.2-UW Control unit: electronic (MWG)
AC 01.2 Non-Intrusive Profinet Table of contents

AUMA SA-UW Specifications

General

Brand	AUMA
Model	SA-UW
Category	Controller
Language	English