Introduction
Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120,
AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29,
Autronica Fire and Security
Page 1
1. Introduction
1.1 Scope
This handbook provides all relevant technical information for the
AutroGuard® Multicriteria Protector, including a desciption of all
variants, technical specifications, functionality, planning, mounting,
configuration, plus testing and maintenance.
1.2 The Manual
Ensure that this Technical Handbook is read and understood before
installing/operating/maintaining the equipment. Pay attention to the
Safety Instructions. Instructions are listed in chapter 2 and repeated
where appropriate in this Technical Handbook.
1.3 Target Audience
The handbook is intended to be used by project engineers and
qualified service and technical personnel who are responsible for the
installation, commissioning and maintenance of the protector. It is
also useful for sales personnel.
1.4 Reference Documentation
The table below shows an overview of the technical documentation
for the protector.
AutroGuard-V430-datasheet, English
AutroGuard-V530-datasheet, English
AutroGuard-V100-datasheet, English
AutroGuard-V110-120-datasheet, English
AutroGuard-technical-handbook, English
AutroGuard-sound-pressure-levels, English
1.5 Downloading Technical Documents
All relevant technical documents can be downloaded from the
Autronica product web at www.product.autronicafire.com/products
To Next Page
Loading...
Need help?
General
