Installation
Installation and Commissioning Handbook, AutroMaster ISEMS - Integrated Safety and Emergency Management System,
116-P-AMASTER-INSTCOMM/IGB, Rev. C, 2016-05-20, Autronica Fire and Security
Page 33
If there are existing partitions on the drive, select the partitions
under the partition list, and click Delete.
Repeat this procedure until all existing partitions are deleted.
3.3.8 Adding a Swap Partition
Select New to define a new partition.
Select swap for the File System Type.
Select Fixed size.
Select 4096 for the Size or at least twice the size of the PC’s
physical memory.
Click OK to return to previous window.
To Next Page
Loading...