Connections Between Fire Detection Systems and AutroMaster ISEMS
Installation and Commissioning Handbook, AutroMaster ISEMS - Integrated Safety and Emergency Management System,
116-P-AMASTER-INSTCOMM/IGB, Rev. C, 2016-05-20, Autronica Fire and Security
Page 74
7.3 Connections Between AutroMaster ISEMS and
AutroSafe 4
All AutroSafe 4 panels within a system are linked together using an
internal Ethernet network. The AutroSafe 4 system uses the same
network to communicate with AutroMaster ISEMS (Integrated Safety
and Emergency Management System).
7.4 Connections Between AutroMaster ISEMS and
Autroprime
Autroprime can be configured to act as a TCP/IP network node,
allowing Autroprime to communicate with an AutroMaster Integrated
Safety and Emergency Management System.
Autroprime can be configured to both receive information from and
transmit information to AutroMaster ISEMS.
The figure below shows AautroMaster connected to a Proxy
server and several Autroprime systems.