Assigning IP Addresses
Installation and Commissioning Handbook, AutroMaster ISEMS - Integrated Safety and Emergency Management System,
116-P-AMASTER-INSTCOMM/IGB, Rev. C, 2016-05-20, Autronica Fire and Security
Page 77
8.2 AutroMaster Connected to AutroSafe 4
When connecting AutroMaster to an AutroSafe 4 system, it is
recommended that another subnet is used for the connection between
AutroMaster and AutroSafe than the one that is used for the internal
communication within the AutroSafe system.
8.3 AutroMaster Connected to Autroprime
When connecting AutroMaster to Autroprime 2.0, the same subnet (IP
number series) can be used. See example in chapter 8.1 (the
guidelines for assigning IP addresses for AutroSafe 3 also applies to
Autroprime).
Routing is also allowed.
To Next Page
Loading...
Need help?
General