Avaya 1120E IP - Retrieving a Parked Call

While on an active call
169
Retrieving a Parked Call
You must have the retrieval code to retrieve a parked call from the server.
You can retrieve a parked call while the IP Deskphone is in the idle state
or while on a call.
To retrieve a parked call
1. Press the Feature soft key.
2. Press the #74 on the key pad.
3. Press the Enter key, located in the
center of the navigation key.
The deskphone displays the following
prompt: UnPark:>
4. Using the key pad, enter the ID for the
parked call.
5. Press the Enter key, located in the
center of the navigation key.
Note: If there is not currently an active
called parked that uses the ID that you
have entered, the deskphone displays
Forbidden.
Feature