Configuring custom settings
177
Audio Codecs
This feature allows you to specify a codec to which you can switch to
during an active call. You can use the Preferences menu to modify the
order of preference of the codecs between calls.
You can select an audio codec by name during a call, or while the
handset is idle. The Audio Codecs feature also gives you control over the
audio configuration that is used for inbound and outbound calls.
To change the codec while on the call, select Audio, Change codec, and
then press OK.
The following context-sensitive soft keys are available on the Audio
Codes page:
• Ok—to view the Audio Codec Selection screen.
• Back—to return to the previous screen.
2. Press the Up/Down navigation key to
highlight one of the following:
— None (no restriction)
— Name (restricts only the name)
— Address (restricts only the address)
— All (restricts name and number)
Change
Back
3. Choose one of the following:
— Press the Change context-sensitive
soft key to change the Outgoing
Privacy restriction to the highlighted
restriction.
— Press the Back context-sensitive
soft key to return to the previous
menu without implementing any
changes.
To Next Page
Loading...
