Configuring custom settings
170
Configuring custom settings
You can use the following additional features:
• “Programmable keys” on page 170
• “Assigning functions to programmable keys” on page 171
• “Configuring speed dial keys” on page 173
• “Querying programmable keys” on page 174
• “Configuring Privacy settings” on page 175
• “Audio Codecs” on page 177
• “Screensaver/screen lock” on page 178
• “Background image” on page 183
• “USB flash memory device support” on page 184
Programmable keys
You can configure the programmable keys on the IP Deskphone or on a
Key Expansion Module (KEM) to activate specific features. When you
configure a programmable key, it acts as a short cut so that you do not
need to enter a feature codes in order to activate the feature.
The IP Deskphone numbers the programmable keys on the IP
Deskphone from 1 to 4. Key 1 is reserved as the line key for the IP
Deskphone.
Figure 18 on page 171 shows the numbering of programmable keys on
the IP Deskphone, as well as the numbering for three Key Expansion
Modules.
To Next Page
Loading...
