Configuring custom settings
172
2. Enter *3 on the dialpad.
3. Press the Enter key.
The Button Programming screen
displays and prompts you to Press a
button.
4. Press the programmable key that you
want to assign a feature to.
The screen prompts you to enter a
feature code.
Feature
5. Press the Feature soft key.
The screen displays the following
prompt: F>.
6. Enter a feature code using the keypad.
7. Press the Enter key.
The screen displays ‘Programmed’ and
a label displays next to the
programmable key to indicate the name
of the assigned feature.
To Next Page
Loading...
