Configuring custom settings
179
The ScrnSvr context-sensitive soft key is located on the idle screen. This
key is available only if the screensaver is enabled, and is accessed by
pressing the More… context-sensitive soft key until ScrnSvr appears.
Pressing the ScrnSvr context-sensitive soft key causes the current
screensaver timer to turn off, and activates the previously-selected
screensaver.
Select the Display Screensaver menu item to display the screensaver
settings screen.
The screensaver settings screen allows you to enable or disable your
screensaver/lock. You can also configure various settings such as the
delay before the screensaver starts, the background image to use, and
the banner text to display when the screensaver/lock is active.
The following are the items on the displayed list:
• Mode—to enable or disable the screensaver and choose if the
screensaver is to be password protected.
• Delay—to configure the time delay before the screensaver is
invoked.
• Image—to select the background image to display when the
screensaver is active.
• Text—to configure the text that appears on screen when the
screensaver is active.
The following are the options available for the screensaver settings menu:
• Select—to select the currently highlighted setting.
• Back—to dismiss the screensaver setting.
Selecting the screensaver setting screen
The screensaver mode settings screen allows you to enable or disable
the screensaver/lock.
Choose Prefs, Display and then select Display Screensaver to display
the screensaver settings screen.
The screensaver mode setting lists the following items:
To Next Page
Loading...
