Configuring custom settings
191
• Select Flash Disk device. The contents of the device are displayed.
• Select the file you wish to copy and then press Send.
• You are prompted to select the device you wish to send the selected
file.
• Select the IP Deskphone as the destination device.
• The file is validated based on the file extension and the passing of the
validation routines and a handler is called for the file. In this case, the
image file copies the images directory of the flash file system on the
IP Deskphone.
• A success message appears on the screen displaying that the file is
copied to the IP Deskphone successfully. Figure 21 on page 191
displays a sample success message.
Figure 21: Sample success message for File Manager operation
Note: After a file is selected, there can be multiple reasons why the
handling cannot complete. The file size may exceed allowed limits,
there may not be enough space on disk, a file with the same name
may already exist, or actions on the selected file type may not be
allowed (configuration flag).
Error conditions display a message on the screen, and any action that
may take some time to complete displays the In progress… message on
the screen as shown in Figure 22 on page 192.
To Next Page
Loading...
