Configure switch
Correct the switch configuration to correct the issue with RADIUS MAC.
T
ask flow Configure switch
The following task flow assists you to configure the ERS 3500 Series device to correct the
RADIUS MAC issue.
Figure 46: Configure switch
Displaying EAPOL port
Review the EAPOL port information.
1. Enter the show eapol port <port#> command to display the information.
2. Ensure that global EAP is enabled and port is eap-auto.
Non-EAP RADIUS MAC not authenticating
Troubleshooting 5.1 February 2013 105
To Next Page
Loading...
