Configured MAC is not authenticating
Correct a MAC to allow authentication.
Work flow Configured MAC is not authenticating
The following work flow assists you to determine the cause and solution of a configured MAC
that does not authenticate as expected.
Figure 43: Configured MAC is not authenticating
Configure the switch
Configure the switch to ensure the correct settings are applied to ensure the MAC is
authenticating.
T
ask flow Configure the switch
The following task flow assists you to ensure the MAC is authenticating on the ERS 3500 Series
device.
Configured MAC is not authenticating
Troubleshooting 5.1 February 2013 101
To Next Page
Loading...
