Non-EAP MHSA MAC is not authenticating
Ensure that the switch is configured correctly
.
Work flow Non-EAP MHSA MAC is not authenticating
The following work flow assists you to determine the solution for an MHSA MAC that is not
authenticating.
Figure 48: Non-EAP MHSA MAC is not authenticating
Configure switch
Configure the switch to enable MHSA.
T
ask flow Configure switch
The following task flow assists you to enable MHSA on the ERS 3500 Series device.
Troubleshooting authentication
108 Troubleshooting 5.1 February 2013
Comments? infodev@avaya.com
To Next Page
Loading...
