Reduce LLDP devices
Reduce the number of LLDP devices. More than 16 devices may cause detection issues.
T
ask flow Reduce LLDP devices
The following task flow assists you to reduce the number of LLDP devices on the system.
Figure 28: Reduce LLDP devices
V
iewing LLDP information
Display the LLDP devices that are connected to a port.
1. Use the show lldp port 1 neighbor command to identify the LLDP
devices.
2. Note if there are more than 16 LLDP-enabled devices on the port.
Reducing LLDP enabled devices
Reduce the number of LLDP devices on the system.
IP phone is not detected
Troubleshooting 5.1 February 2013 75
To Next Page
Loading...
