Match EAP-MAC-MAX to EAP users
When the number of authenticated users reaches the allowed maximum, lower the eap-
macmax to the exact number of EAP users that may soon enter to halt soliciting EAP users
with multicast requests.
Identifying number of users at allowed max
Obtain the exact number of EAP users that may soon enter when the number of authenticated
users reaches the allowed max.
Use the show eapol multihost status command to display the authenticated users.
T
ask flow Match EAP-MAC-MAX to EAP users
The following task flow assists you to match the EAP-MAC-MAX to the number of EAP
users.
Figure 38: Match EAP-MAC-MAX to EAP users
Troubleshooting authentication
94 Troubleshooting 5.1 February 2013
Comments? infodev@avaya.com
To Next Page
Loading...
