Setting EAPOL port administrative status to auto
Set the EAPOL port administrative status to auto.
1.
Use the eapol status auto command to change the port status to auto.
2. Ensure that there are no errors after the command execution.
EAP multihost repeated re-authentication issue
Eliminate the multiple authentication of users.
EAP multihost repeated re-authentication issue
The following work flow assists you to determine the cause and solution of an EAP multihost
that authenticates repeatedly
.
Figure 37: EAP multihost repeated re-authentication issue
EAP multihost repeated re-authentication issue
Troubleshooting 5.1 February 2013 93
To Next Page
Loading...
