Stack Health Check: Cascade Up and Cascade Down
columns display UP WITH ERRORS
Use the recovery tree in this section if the switch displays “UP WITH ERRORS” in the Cascade
Up and Cascade Down columns when you issue the show stack health command.
Cascade Up and Cascade Down columns display UP WITH ERRORS
recovery tree
About this task
The following figure shows the recovery tree to use if the output from the switch displays "UP
WITH ERRORS" in the Cascade Up and Cascade Down columns when you issue the show
stack health
command.
Emergency recovery trees
54 Troubleshooting 5.1 February 2013
Comments? infodev@avaya.com
To Next Page
Loading...
