Name Description
ConfiguredServerAddr Specifies the server IP address. If an IP
address is specified, the agent is restricted
to use this server IP address. The default is
0.0.0.0, which allows the agent to register
with any server
.
ConfiguredServerPort Specifies the server port. The default is 0,
which allows the agent to disregard the
source port information in server traffic.
The agent must use the same port.
ConfiguredServerAddrType Indicates IPv4–based communications.
ConfiguredAltServerAddr Specifies a secondary server IP address.
SupportApps Indicates SLA Monitor supported
applications. This is a read-only field.
AgentAddressType Indicates IPv4–based communications. This
is a read-only field.
AgentAddress Indicates the agent IP address. This is a
read-only field.
AgentPort Indicates the agent port. This is a read-only
field.
RegisteredWithServer Indicates whether the agent is registered
with a server. This is a read-only field.
RegisteredServerAddrType Indicates IPv4–based communications. This
is a read-only field.
Configuring SLA Monitor
84 Troubleshooting 5.1 February 2013
Comments? infodev@avaya.com
To Next Page
Loading...
