Avaya 3641 - Page 75

Avaya 3641/3645 Wireless IP Telephone Configuration
Issue 6, January 2011 75
Default Settings:
The profile options on the standby menu may be reset to their default values by the
Restore Defaults option in the Admin menu. These are the default settings:
Setting/profile
Silent Vibrate Soft Loud Custom
Ring Cadence
Off Off PBX PBX PBX
Ring Tone Tone 1 Tone 1 Tone 1 Tone 1 Tone 1
Ring Volume
1 1 3 7 5
Vibrate Cadence Off PBX Off Off PBX
Ring Delay
0 0 0 0 5
Noise Mode Normal Normal Normal Normal Normal
Headset/Speaker
Speaker Speaker Speaker Speaker Speaker
Key Tones Off Off On On On
Warning Tones
Off Off Off Off Off
10
Push-to-talk Off Off On On On
11
PTT Vibrate
Disabled Disabled Disabled Disabled Disabled
12
Emergency Dial On On On On On
10
Push-to-talk must be enabled by the system administrator before it can be activated by the user. If it is not enabled,
then it will not appear on the Config menu and will not be “On” for any profile.
11 11
PTT Vibrate is available only when Push-to-talk has been enabled by the system administrator.
12
Emergency Dial must be enabled by the system administrator. If enabled, it will be “On” (or available for use) in every
profile.