Avaya 3641 - Page 19

The Handset Display
Avaya 3641/3645 IP Wireless Handset SIP User Guide June 2012 19
Softkey
Name
Displayed during…
Press to…
More
More
Certain menus
Display additional menu
options.
Msg
Message
Initial dial screen when
new line is selected and a
dial tone is active prior to
entering first character of
the number to be dialed.
Initiate a call to the
specified message center
contact address for
retrieval or administration
of voicemail.
Mute
Toggle muting
In an active call.
Toggle audio transmission
to the far end. The call
status tab shows when
not muted or when
muted.
Nois
Noise Mode
Standby mode, second set
Cycle through the three
Noise mode options.
OK
OK
Power up registration if
username is not configured
in admin menu.
Send the username and
password to the SIP server
for authorization to register
the handset.
Phbk
Phonebook
Standby mode
Open the phonebook
menus.
Prof
Profiles
Standby mode
Display the list of Profiles.
Redl
Redial
Prior to entering the first
character of a dial number.
Redial the last number that
was dialed.
Rej
Reject
Incoming call on the
selected line.
Reject the incoming call.
The SIP server will then
redirect the call elsewhere,
such as voicemail.
Resm
Resume
In an active call and you
have placed the call on
hold, or in standby mode if
any call is on hold.
Resume a call that was
previously placed on hold
or that went on hold when
another line was activated.
Save
Save
Entering a dial number as
a call forwarding
destination.
Save the dial number as
the call forwarding
destination for the selected
line.
Spdl
Speed dial
In the Phonebook
Open the speed dial list in
order to assign a speed dial
number to the phonebook
entry.
Spkr
Speakerphone
Standby mode and in an
active call.
Activate the speakerphone.
Symb
Symbols
Entering a username or
password.
Entering the digits of a
number.
Select the set of symbols
available on the keypad
while entering data.
Tran
Transfer
In call
Initiate a transfer. Press a
second time to complete
the transfer.