Using the Push-to-talk Features of your Avaya 3645 IP Wireless Handset
Avaya 3641/3645 IP Wireless Handset SIP User Guide June 2012 59
Use PTT Vibrate
To enhance the alerting of a PTT call, PTT Vibrate may be enabled on the Config menu.
When PTT Vibrate is enabled, the handset will vibrate three times whenever a PTT
broadcast is received, whether the handset is in standby or in a call. If in a call, the chirp
alert will also sound. The vibration does not replace any PTT tone volume already set.
To set the handset for PTT vibrate only, enable PTT Vibrate and set the tone volume to
zero.
PTT Vibrate is disabled by default.
Transmit on the Priority Channel
Press and release the TALK button. Select the priority channel from the list. Press and
hold TALK, then speak. The priority channel takes priority over all other calls in progress.
End a PTT Call
Press the END key to exit the PTT call.
Change the PTT Volume
Press the up/down volume buttons on the side of the handset while receiving a PTT call.
Answer a Telephone Call during a PTT Transmission
Press the START key. PTT transmissions will be pre-empted by the telephone call.
Start a Telephone Call during a PTT Transmission
Press the START key and dial the number. PTT transmissions will be pre-empted by the
telephone call.
Turn off PTT
Change to a different profile. (The Silent and Vibrate profiles disable PTT by default.)
To Next Page
Loading...
