42 Avaya 3641/3645 IP Wireless Handset SIP User Guide June 2012
Redial the Last Number you Dialed
▬▬▬▬▬▬▬▬▬
1. Press START.
2. Press the Redl softkey.
3. Verify that the displayed number is the one you want and the line number is
valid.
4. Press Nav OK or START.
▬▬▬▬
Note:
The last number dialed is stored in volatile memory and will not survive a power cycle of
the handset.
Silence the Ringing
Press the END key to silence the external speaker ring and convert to in-ear speaker
ringing.
External speaker ringing will resume when the next incoming call is received while the
handset is in standby mode.
Change the Ring Volume
Press the up/down volume buttons on the side of the handset during ringing. Ring
volume can also be adjusted in the Profile options of the Config menu.
Adjust the Handset Volume
When in a call, press the up/down volume buttons on the side of the handset to adjust
the loudness of the audio.
Adjust the Speaker Volume
While speakerphone is active, press the up/down volume buttons on the side of the
handset during the call.
To Next Page
Loading...
