Setting a call pickup ring tone
About this task
You can set ring tones to alert you when you receive an incoming call.
Procedure
1. Press Avaya Menu.
2. Select Options & Settings...
3. Select Screen & Sound Options.
4. Press Select or OK.
5. Select Call Pickup Ring Type.
6. Press Change or OK or use the Right/Left Arrows to toggle from one ring tone/
number to another. Each tone sounds briefly as you move to it.
7. If desired, press Play or OK to listen to the ring tone.
8. Repeat the last two steps until you find the ring tone you want for calls within your
pickup group.
9. Press Save to make it your call pickup ring tone.
Setting an alert for a call pickup group
About this task
Use this task to set a call pickup group alert on your deskphone. The call pickup group alert
provides a visual or an audio alert on your deskphone when a member in your call pickup group
gets a call.
Procedure
1. Press Avaya Menu .
2. Press Select to select Options & Settings > Screen & Sound Options > Call
Pickup Indication.
3. Press Change to select one of the following:
• Audible: Provides an audio alert.
• Visual: Provides a visual alert.
• Both: Provides both audio alert and visual alert.
• None: Provides no call pickup alert.
Avaya Menu
26 Using Avaya 9601 IP Deskphone SIP November 2013
Comments? infodev@avaya.com
To Next Page
Loading...
