next number denotes the extension your administrator has predefined as your
automatic intercom destination extension.
3. Press the number(s) that corresponds to the destination extension.
4. Press Enter or OK to activate the intercom call to that extension, where the call
appearance identifies the incoming call with your name followed by ICOM.
Enabling call forwarding when your line is busy or you do
not answer
About this task
Use this task to set a number to which your calls are forwarded when your line is busy or when
you do not answer a call. You must enter the telephone number where the calls are forwarded
each time you enable this feature.
Procedure
1. From the Phone Screen, gain access to the Features menu.
2. Press Select to choose Call Fwd Busy/No Ans.
3. Enter the number to which you want to forward your calls.
4. Press OK to turn call forwarding off if it is already on.
Blocking your extension from displaying during calls
About this task
You can override the system (default) setting to display your extension on outgoing calls. Use
the Calling Party Number Blocking feature to prevent your number from displaying.
Procedure
1. From the Phone screen, scroll right to access the Features menu.
2. Select CPN Block.
To stop calling party number blocking, see
Displaying your extension on outgoing
calls on page 76.
3. Press OK.
Enabling call forwarding when your line is busy or you do not answer
Using Avaya 9601 IP Deskphone SIP November 2013 75
To Next Page
Loading...
