Administering deskphone options
96 Administering Avaya 9601/9608/9608G/9611G/9621G/9641G IP Deskphones SIP
Comments? infodev@avaya.com
PRESENCE_ACL_CONFIRM 0 Specifies whether the deskphone automatically
confirms a request from a watcher to monitor user
presence. You can assign following values to this
parameter:
● 0: Indicates auto confirm. In this case, the
deskphone auto confirms requests from all
watchers to monitor user presence.
● 1: Indicates ignore. In this case, the
deskphone ignores requests from all
watchers to monitor user presence. A shared
control client or another device registered
with the same AOR as the deskphone
displays a prompt to the user. The prompt
confirms whether to accept or deny a
request from a watcher to monitor user
presence. To display the prompt, the shared
control client or the device with the same
AOR must also subscribe to presence and
must have an interface that can display the
prompt.
Note:
Note: Note: This parameter has no effect
if you configure the Presence
server to auto confirm all watchers
request to monitor user presence.
PRESENCE_SERVER " " (Null) 0 to 255 characters: one IP address in dotted
decimal or DNS name format, with an optional port
(separated from the address by a colon).
Used to access a server for presence indications.
In some environments the address of the SIP
proxy/registrar may be different than the presence
server. In this case the presence server is set via
this parameter. If both addresses are the same, it is
not necessary to set PRESENCE_SERVER (shall
remain null).
Parameter Name Default
Value
Description and Value Range
To Next Page
Loading...
