Administering display language options
Issue 3 January 2014 127
● RESET VALUES - To reset the deskphone to default values including the registration
extension and password, any values administered through local procedures, and values
previously downloaded using DHCP or a settings file.
● RESTART PHONE - To restart the deskphone in response to an error condition, including
the option to reset parameter values.
● SIG - To change the default signaling value from SIP to H.323 or vice versa.
● SIP - To configure SIP call settings.
!
WARNING:
WARNING: The SIP call settings entered through the CRAFT menu take precedence over
other sources for this data, for example- 46xxsettings.txt, or PPM. The only way
to override these settings is to go into the CRAFT menu and remove the settings
or perform a “Clear” of the deskphone from the CRAFT menu.
● SNTP - To configure the time server settings.
● SSON - To set the site-specific option number.
● VIEW - To review the system parameters for the deskphone to verify current values and
file versions.
Administering display language options
9600 Series IP Deskphones are factory-set to display information in the English language.
However, the user can change the language of the deskphone and can choose any of the
following languages:
● Arabic
● Simplified Chinese
● Dutch
● English
● Parisian French
● German
● Hebrew
● Italian
● Japanese
● Korean
● Brazilian Portuguese
● Russian
● Latin American Spanish
● Canadian French
● Castilian Spanish
Administrators can specify from one to four languages per deskphone to replace English. End
users can then select which of those languages they want their deskphone to display.
To Next Page
Loading...
