EasyManua.ls Logo

Avaya 9608 - Chapter 3: Network Requirements; Performing a Network Assessment; Hardware Requirements; Server Requirements

Avaya 9608
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Issue 3 January 2014 23
Chapter 3: Network requirements
Performing a network assessment
Perform a network assessment to ensure that the network has the capacity for the expected
data and voice traffic, and that it can support all applications such as following:
SIP
DHCP
HTTP and HTTPS.
Also, QoS support is required to run VoIP on your configuration. For more information, see
Administering TCP/UDP port selection on page 30 and the QoS parameters L2QAUD, L2QSIG,
DSCPAUD, and DSCPSIG in
Customizable system parameters for SIP-based 9600 Series IP
Deskphones on page 66.
Hardware requirements
For LAN powering, you need a Category 5e cables designed to the IEEE 802.3af-2003
standard.
Server requirements
The following server types can be configured for the 9600 Series IP Telephones:
DHCP server
HTTP or HTTPS server
Session Manager
Network Time Protocol server for SNTP
Alternate Session Manager for reliability
System Manager
Communication Manager
Presence server

Table of Contents

Other manuals for Avaya 9608

Related product manuals