Customizing ring tones
Issue 3 January 2014 135
Downloadable ring tones
You can specify list of audio files that deskphones can download as ring tones. The users can
select the required ring tone from the downloaded list.
The audio files list can contain 0 to 1023 UTF-8 characters. Provide the list of audio files as
name-value pairs separated by commas without any intervening spaces, where:
● name: Is the display name that you assign to the ring tone. Ensure that you:
- Do not include a comma, an equals sign (=), or a double quote character in the display
name.
- Quote the entire list if you include spaces in any of the display name.
- Specify the display name that has the length that your deskphone can display. If the
length of the display name exceeds the specified limit of your deskphone, the deskphone
truncates the name.
- Do not specify a display name that contains only numbers.
Next Note Leave empty; this cell is not currently used. Reserved for future use.
Cadence Patterns
and States
Cadence patterns are set for internal,
external, priority, and intercom calls.
Cadence 1 to 8
Cadence
Duration
The duration of the cadence in milliseconds,
from 0 to 2^16.
Next Cadence The next cadence is executed after the
current cadence value is completed. This is
used to create a loop of notes. For example,
if number 1 is used for cadence state 8,
when cadence 8 is completed, cadence 1
will follow.
Cadence Next
Index
Leave empty; this cell is not currently used. Reserved for future use.
Create xml When all applicable cells have been filled
in, use this control to create an xml file for
this specific tone.
Cell Name Description Comment
To Next Page
Loading...
