Avaya 9608 - Call Handling Operations

Configuring Avaya Aura
®
for Avaya Deskphone SIP
36 Administering Avaya 9601/9608/9608G/9611G/9621G/9641G IP Deskphones SIP
Comments? infodev@avaya.com
About button modules
Note:
Note: The deskphone models 9601 and 9621G do not support button modules and do
not have an IEEE power switch.
You can add up to three BM12 or SBM24 button modules to the deskphones. However, multiple
button modules attached to a single deskphone must all be the same model type, either BM12
or SBM24.
When you use button modules, you may need to change the power over Ethernet (PoE)
settings on the IEEE switch. The IEEE switch is on the back panel of the deskphones and is in
low (L) state by default. Refer the following table for the setting of the IEEE switch while using
button modules with the deskphones.
!
Important:
Important: The maximum combined number of busy indicators, team buttons and bridged
appearances, that you can configure on button modules is 48. You can configure
all button module lines as long as the specified restriction is met.
9608 9630SIP
9611G 9630SIP
9621G 9620SIP
9641G 9640SIP
SIP-based 9600
Series IP Deskphones
model
Administer on
Communication
Manager 6.0 or
6.1 as
Deskphone
model
One
BM12
button
module
Two
BM12
button
modules
Three
BM12
button
modules
One
SBM24
button
module
Two
SBM24
button
modules
Three
SBM24
button
modules
9608/9608G L L H L H H
9611G H H H H H H
9641G L L L L L H