Customizable system parameters for SIP-based 9600 Series IP Deskphones
Issue 3 January 2014 107
SNMPSTRING " " (Null) Text string containing the SNMP community name
string (up to 32 ASCII characters, no spaces).
SNTPSRVR " " (Null) Used to retrieve date and time via SNTP (in case of
several entries first address always first, etc.). Zero
to 255 characters: zero or more IP Addresses in
dotted decimal or DNS name format, separated by
commas without any intervening spaces.
SPEAKERSTAT 2 Limits the hands-free audio operation mode. Valid
values are:
0= Speakerphone not allowed
1= One-way speakerphone operation allowed
(monitor)
2= Two-way speakerphone operation allowed
SSH_ALLOWED 0 Specifies whether and how Secure Shell (SSH) is
supported. Values are:
0 = Disabled.
1 = Enabled with challenge/response
authentication.
SSH_BANNER_FILE " " (Null) The file name or URL of a file that contains warning
banner text to be sent to SSH clients before
authentication instead of the built-in default English
warning banner text.
SSH_IDLE_TIMEOUT 10 Minutes of inactivity after which SSH will be
disabled.
0 = No timeout
The range of idle time = 1 to 32767.
SUBSCRIBELIST " " (Null) String representing the Push subscription list.
Values are: 0 to 255 ASCII characters: zero or
more URLs separated by commas without any
intervening spaces.
Parameter Name Default
Value
Description and Value Range
To Next Page
Loading...
