Customizable system parameters for SIP-based 9600 Series IP Deskphones
Issue 3 January 2014 77
DSTSTOP 1SunNov2L Used to identify stop date for automatic change to
Daylight Saving Time. Default string length with a
format of either odddmmmht or Dmmmht, where:
o = one character representing an ordinal adjective
of "1" (first), "2" (second), "3" (third), "4" (fourth) or
"L" (last)
ddd = 3 characters containing the English
abbreviation for the day of the week
mmm = 3 characters containing the English
abbreviation for the month
h = one numeric digit representing the time to make
the adjustment, exactly on the hour at hAM (0h00
in military format), where valid values of h are "0"
through "9"
t = one character representing the time zone
relative to the adjustment where "L" is local time
and U is universal time
D = one or two ASCII digits representing the date of
the month from "1" or "01" to "31", or the character
"L", which means the last day of the month)
DTMF_PAYLOAD_TYPE 120 RTP dynamic payload used for RFC 2833
signaling. Range is 96 to 127.
ENABLE_AUTOMATIC_ON_TH
E_PHONE_PRESENCE
1
This parameter controls whether "on the phone"
presence status is sent out automatically when
user whose presence is tracked is on a call (or
goes off-hook). Calls on bridged line appearances
(that local user has not bridged to) do not affect
the trigger of the "on the phone" presence update.
Valid values are:
● 0, for disabled when the person whose
presence is being tracked goes off-hook and
the presence of the person is not reported.
● 1, for enabled when the person whose
presence is being tracked goes off-hook and
the presence of the person is not reported.
Parameter Name Default
Value
Description and Value Range
To Next Page
Loading...
