Customizable system parameters for SIP-based 9600 Series IP Deskphones
Issue 3 January 2014 83
EXCHANGE_SERVER_SECUR
E_MODE
1 Specifies whether the deskphone communicates
with the Exchange server over https or http. You
can assign the following values to this parameter:
● 0: To use HTTP
● 1: to use HTTPS
For example,
SET EXCHANGE_SERVER_SECURE_MODE 0
EXCHANGE_SNOOZE_
TIME
5 Used to administer how long in minutes for the
calendar reminder (as set in
ENABLE_EXCHANGE_REMINDER and
EXCHANGE_REMINDER_TIME to reappear after
it has been snoozed (temporally dismissed) by the
user. Values are: 0 to 60 (minutes).
EXCHANGE_USER_
DOMAIN
" " (Null) User domain (URL) for Microsoft Exchange™
Server. Range is the default URL string length.
EXTEND_RINGTONE " " (Null) Represents a list of xml files, each representing
custom ring tone information. Alternate ring tones
to replace the standard Avaya ring tones. As of SIP
software Release 2.4, Korean ring tones are
available as is the ability to specify custom ring
tones, as described in Customizing ring tones. A
string up to 1023 characters containing up to 8
alternate ring tones in the format Ringtone1.xml,
Ringtone2.xml, or KoreanRT1.xml,
KoreanRT2.xml, etc.
FAILBACK_POLICY "auto" The policy in effect for recovery from failover. The
valid values are:
● admin: The deskphone waits for
administrative intervention before attempting
to failback to a higher priority controller.
● auto: The deskphone periodically checks the
availability of the primary controller and fails
back to the primary controller if available.
Note:
Note: The value that is set in System
Manager overwrites this value.
FAILED_SESSION_
REMOVAL_TIMER
30 Timer to automatically remove a failed call session.
Range in seconds is 5 to 999.
Parameter Name Default
Value
Description and Value Range
To Next Page
Loading...
