Customizable system parameters for SIP-based 9600 Series IP Deskphones
Issue 3 January 2014 91
MYCERTCN $SERIALN
O
Common name (CN) for SUBJECT in SCEP
certificate request. Values are:
$SERIALNO = the phone's serial number is
included as CN parameter in the SUBJECT of a
certificate request.
$MACADDR = the deskphone's MAC address is
included as CN parameter in the SUBJECT in the
certificate request.
MYCERTDN " " (Null) Common part of SUBJECT in SCEP certificate
request. String which defines the part of SUBJECT
in a certificate request (including Organizational
Unit, Organization, Location, State, Country), of 0
to 255 characters, starting with / and separating
items with /.
MYCERTKEYLEN 1024 Private Key length in range of 1024 to 2048.
MYCERTRENEW 90 Threshold to renew certificate (given as percentage
of device certificate's Validity Object). Range is 1 to
99.
MYCERTURL " " (Null) URL of SCEP server. String representing zero or
one URI starting with "http://", 0 to 255 characters.
MYCERTWAIT 1 Flag defining phone's behavior when performing
certificate enrollment. Values are:
0=wait until a certificate or a denial is received or a
pending notification is received
1=periodical check in the background
NETMASK 0.0.0.0 IP subnet mask. Range is 7 to 15 ASCII characters
defining one IP Address in dotted-decimal format.
NO_DIGITS_TIMEOUT 20 Number of seconds of delay after going "off-hook"
or getting secondary dial tone before the
deskphone automatically plays a warning tone and
does not accept dial input any longer. Range in
seconds is 1 to 60.
OUTBOUND_
SUBSCRIPTION_
REQUEST_DURATION
86400 Number of seconds used in initial SUBSCRIBE
messages. This is the suggested duration value of
the deskphone, which might be lowered by the
server, depending on the server configuration.
Range is 60-31536000. Note that the default value
is equal to one day and the maximum value
represents one year.
Parameter Name Default
Value
Description and Value Range
To Next Page
Loading...
