Configure Multiple SSID/VLAN/Security Mode Entries
4-144 Avaya Wireless AP-3 User’s Guide
VLAN. Simply configure a non-zero management VLAN ID and enable
VLAN to restrict management of the AP to members of the same VLAN.
!
CAUTION:
If a non-zero management VLAN ID is configured then management
access to the AP is restricted to wired or wireless hosts that are members
of the same VLAN. Ensure your management platform or host is a mem-
ber of the same VLAN before attempting to manage the AP.
1. Click Configure > SSID/VLAN/Security.
2. Set the VLAN Management ID to a value between 0 and 4094 (a
value of 0 disables VLAN management).
3. Place a check mark in the Enable VLAN Protocol box.
Provide Access to a Wireless Host in the Same Workgroup
The VLAN feature can allow wireless clients to manage the AP. If the
VLAN Management ID matches a VLAN User ID, then those wireless
clients who are members of that VLAN will have AP management access.
!
CAUTION:
Once a VLAN Management ID is configured and is equivalent to one of
the VLAN User IDs on the AP, all members of that User VLAN will have
management access to the AP. Be careful to restrict VLAN membership to
those with legitimate access to the AP.
1. Click Configure > VLAN.
To Next Page
