Avaya AP-3 - Syntax Examples

Telnet Commands
Avaya Wireless AP-3 User’s Guide A-101
Syntax Examples
Configure Management Interfaces
[Device-Name]> set telifbitmask <(see Table A-4)>
Choose from the following values:
Set TCP Port
[Device-Name]> set telport <Telnet port number (default is 23)>
Table A-4 Interface Bitmask Values
Interface bitmask Description
0 or 2 = disable (all interfaces) All management channels disabled
1 or 3 = Ethernet only Ethernet only enabled
4 or 6 = Wireless A only Wireless A only enabled
8 or 10 = Wireless B only Wireless B only enabled
12 = Wireless A and Wireless B Wireless A and Wireless B enabled
13 or 15 = all interfaces All management channels enabled