Initialization
2-20 Avaya Wireless AP-3 User’s Guide
Initialization
Avaya provides two tools to simplify the initialization and configuration of
an AP:
• ScanTool
• Setup Wizard
ScanTool is included on the Installation CD; the Setup Wizard launches
automatically the first time you access the HTTP interface.
NOTE:
These initialization instructions describe how to configure an AP
over an Ethernet connection using ScanTool and the HTTP
interface. If you want to configure the unit over the serial port, see
Setting IP Address using Serial Port for information on how to
access the CLI over a serial connection and The Command Line
Interface for a list of supported commands.
To Next Page
