Avaya AP-3 - CLI Error Messages; Avaya Wireless AP-3 Users Guide

General Notes
Avaya Wireless AP-3 User’s Guide A-7
CLI Error Messages
The following table describes the error messages associated with
improper inputs or expected CLI behavior.
Error Message Description
Syntax Error Invalid syntax entered at the command
prompt.
Invalid Command A non-existent command has been entered
at the command prompt.
Invalid Parameter
Name
An invalid parameter name has been entered
at the command prompt.
Invalid Parameter
Value
An invalid parameter value has been entered
at the command prompt.
Invalid Table Index An invalid table index has been entered at
the command prompt.
Invalid Table
Parameter
An invalid table parameter has been entered
at the command prompt.
Invalid Table
Parameter Value
An invalid table parameter value has been
entered at the command prompt.
Read Only Parameter User is attempting to configure a read-only
parameter.
1 of 2