Avaya AP-3 - Spanning Tree Commands; Spanning Tree Parameters

Spanning Tree Commands
A-90 Avaya Wireless AP-3 User’s Guide
Spanning Tree Commands
Spanning Tree Parameters
8 or 10 = Wireless B only Wireless B only enabled
12 = Wireless A and Wireless B Wireless A and Wireless B enabled
13 or 15 = all interfaces All management channels enabled
Table A-3 Interface Bitmask Values
Interface Bitmask Description
2 of 2
Name Type Values Access CLI Parameter
Spanning Tree Group N/A R stp
Spanning Tree
Status
Integer enable (default)
disable
RW stpstatus
Bridge Priority Integer 0 – 65535
32768 (default)
RW stppriority
Maximum Age Integer 600 – 4000
(in 0.01 sec
intervals; i.e., 6 to
40 seconds)
2000 (default)
RW stpmaxage
1 of 2