Avaya AP-3 - System

System
Avaya Wireless AP-3 User’s Guide 4-5
7. Configure the Access Point’s parameters as necessary. After
changing a configuration value, click OK to save the change.
8. Reboot the Access Point for all of the changes to take effect.
System
You can configure and view the following parameters within the System
Configuration screen:
Parameters Description
Name The name assigned to the AP. Refer to
Dynamic DNS Support and Access Point
System Naming Convention for rules on
naming the AP.
Location The location where the AP is installed.
Contact Name The name of the person responsible for the
AP.
Contact Email The email address of the person
responsible for the AP.
Contact Phone The telephone number of the person
responsible for the AP.
1 of 2