Avaya AP-3 - Accessing the AP CLI; Using Hyperterminal to Log in to the AP

Accessing the AP CLI
Avaya Wireless AP-3 User’s Guide A-21
Accessing the AP CLI
You can use HyperTerminal or Telnet to access the AP CLI:
• Using HyperTerminal to Log in to the AP
• Using Telnet to Log in to the AP
Using HyperTerminal to Log in to the AP
1. Open your terminal emulation program (like HyperTerminal) and
set the following connection properties:
— Com Port: <COM1, COM2, etc., depending on your computer>
— Baud rate: 9600
— Data Bits: 8
— Stop bits: 1
— Flow Control: None
— Parity: None