Link Integrity Commands
Avaya Wireless AP-3 User’s Guide A-69
Syntax Examples
[Device-Name]> show linkinttbl (this shows the current links)
[Device-Name]> set linkinttbl <1-5
(depending on what table row
you wish to address)> ipaddr <ip address of the host computer
you want to check>
[Device-Name]> set linkintpollint <the interval between link
integrity checks>
[Device-Name]> set linkintpollretx <number of times to
retransmit before considering the link down>
[Device-Name]> set linkintstatus enable
[Device-Name]> show linkinttbl (confirm new settings)
[Device-Name]> reboot 0
To Next Page
