You can also press the status indicator LEDs to mute and unmute the phone.
LED color Description
Steady red Microphones are on mute.
Flashing red A call is on hold. Microphones and the speaker are turned off.
Steady green A call is in progress.
Flashing green An incoming call is ringing.
Steady blue Active Bluetooth connection.
Flashing blue The phone is in Bluetooth pairing mode.
LEDs off The phone is inactive.
Specifications
Avaya Conference Phone B199 supports the following specifications:
Name Description
Power • PoE 802.3af
• PoE 802.3at
• PoE injector available as an accessory
Connectivity • Ethernet RJ45 10/100/1000 Mbps, PoE 802.3af, and PoE 802.3at
• USB 3.0 device
• Built-in Bluetooth LE and NFC
• Bluetooth Classic
• Daisy Chain (audio) ports (6-pin RJ-type)
Screen Graphical touch screen with a resolution of approximately 480 x 800 and
size of 4.3”
Acoustics • 3 symmetrically placed MEMS microphones
• Full range speaker in the sealed enclosure
Music • PoE 802.3at: 91 dB and bass boost
• PoE 802.3af: 87 dB
• Daisy Chain: 91 dB
Speech • PoE 802.3at: 91 dB
• PoE 802.3af: 87 dB
• Daisy Chain: 91 dB
USB Micro USB 3.0 device Type B
Table continues…
Specifications
August 2020 Using Avaya Conference Phone B199 17
Comments on this document? infodev@avaya.com
To Next Page
Loading...
