Upgrading Smart Expansion Microphone
About this task
You can upgrade the Smart Expansion Microphone when an update for the microphone is
available. If the update is available, the phone shows the following message during boot after a
factory reset or firmware upgrade: An update for your Smart Microphone is
available. See user manual.
Procedure
1. Hold the Microphone Muted button on the Smart Expansion Microphone while you
connect the microphone cable, and keep holding the button for 5 seconds after you
inserted the cable.
When you release the button, it flashes red one time and then starts flashing green to
indicate that the upgrade process has started. The upgrade process takes about 7
minutes. When the upgrade is completed, the microphone LEDs turn off.
2. Check the microphone version by doing one of the following:
• On the phone screen, tap Settings > Status.
• On the web interface, go to the Status tab.
Expansion of the phone coverage
August 2020 Using Avaya Conference Phone B199 55
Comments on this document? infodev@avaya.com
To Next Page
Loading...
