Configuring the Avaya
®
Conference Assistant settings
About this task
Use this procedure to configure the Avaya
®
Conference Assistant settings from the application
installed on a mobile device.
Procedure
1. Run Avaya
®
Conference Assistant on your mobile device.
2. (Optional) Connect to Avaya Conference Phone B199.
The phone displays a connection symbol on the screen.
3. Tap Settings and proceed with configuration.
Avaya
®
Conference Assistant settings
You can set the following parameters for Avaya Conference Phone B199 from the Avaya
®
Conference Assistant interface:
Name
Description
Connection To enable or disable the connection to Avaya Conference Phone B199. The
options are:
• On: The default option.
• Off: To use Avaya
®
Conference Assistant without connection to any Avaya
Conference Phone B199. You can use the conferencing application from your
mobile device within your mobile phone subscription.
Moderator code To join the scheduled conference calls as a moderator. You must enter
respective codes in the following fields:
• Use moderator code: To host conference calls over a bridge service. For
every call you join, Avaya
®
Conference Assistant uses your moderator code
instead of your guest code.
• Instead of guest code: To specify the guest code instead of which Avaya
®
Conference Assistant uses your moderator code.
Dial prefix To enter the prefix digits in the Use prefix field.
My bridge To enter the phone number and optional PIN code of the most frequently used
conference service. You can use the My bridge button to join the conference
call.
The My bridge button appears in the calendar view.
Table continues…
Phone management application
August 2020 Using Avaya Conference Phone B199 50
Comments on this document? infodev@avaya.com
To Next Page
Loading...
