3. Tap the icon twice to return to the home screen.
Setting the password for Avaya Conference Phone B199
About this task
Use this procedure to set the password for your B199 Conference Phone when you first activate
the phone or after a reset to the factory settings.
Before you begin
Connect the PoE cable to ensure the phone power supply.
Procedure
1. Wait for the following message to appear on the phone screen:
For full functionality, please set administration password.
2. Tap Yes to set the password.
3. (Optional) Tap Skip to avoid setting the password.
In this case, B199 Conference Phone will be functioning in the administration mode, and
you will be able to configure settings on the phone. However, you will not be able to access
the web interface.
4. Using the keyboard on the phone screen, type your password. It can contain letters,
numbers, and special characters.
The password must contain at least 4 characters. As you enter the password, the phone
informs if the password has acceptable length.
5. Type the password again to confirm it.
6. Tap the
icon three times to return to the home screen.
The phone reboots.
Changing the password
About this task
As an administrator, you can change the administrator password using the phone.
Procedure
1. On the phone screen, tap Settings > Admin Login.
2. Enter your administrator password.
The Settings menu in the full functionality mode opens.
3. In the Settings menu, tap Phone > Security.
Configuration of Avaya Conference Phone B199
August 2020 Using Avaya Conference Phone B199 31
Comments on this document? infodev@avaya.com
To Next Page
Loading...
