Procedure
At the prompt, enter a portion of an ACLI command, followed by a space and a question
mark (?).
Obtaining a command name
If you are unsure about the correct name of a command, you can enter a partial command
name and ACLI displays the closest match.
Use this procedure to obtain a correct command name.
Procedure
1. At the prompt, enter a portion of the command name.
2. Press the Tab key.
Obtaining a command name
1. At the prompt, enter down.
2. Press Tab.
The system displays download.
Displaying the ACLI command modes
Use this procedure to display a list of the ACLI command modes with mode access
commands.
Procedure
At the prompt, enter:
help modes
Note:
The help modes command is available in all ACLI command modes.
Avaya Command Line Interface fundamentals
14 Fundamentals of ERS 3500 Series March 2014
Comments? infodev@avaya.com
To Next Page
Loading...
