Chapter 6: Enterprise Device Manager
procedures
Starting EDM
To configure and maintain your switch through a Web-based graphical user interface, start
EDM.
Before you begin
• Ensure that the switch is running.
• Note the switch IP address.
• Ensure that the Web server is enabled.
• Note the user name.
• Note the password.
• Open one of the supported Web browsers.
Procedure
1. In a supported Web browser, enter the IP address of the switch using one of the
following formats:
• http://<IP Address>
• https://<IP Address>
2. Enter the user name.
3. Enter the password.
4. Click Log On.
Using shortcut menus
In the EDM Device Physical View you can use shortcut menus to edit objects and apply
changes.
Fundamentals of ERS 3500 Series March 2014 37
To Next Page
Loading...
