Chapter 7: Configuration files
fundamentals
Configuration files fundamentals
This chapter provides fundamental information about working with configuration files.
Configuration files are ASCII text files that allow the administrator to change switch
configuration quickly.
Procedures to manage binary configuration files are included in the Enterprise Device Manager
section.
ACLI configuration files
You can use ACLI to display, store, and retrieve configuration files, and to save the current
configuration.
Viewing current configuration using ACLI
Use this procedure to view the current configuration.
Procedure
1. Log on to the Privileged EXEC mode in ACLI.
2. At the command prompt, enter the following command:
show running-config [verbose] [module]
Saving current configuration using ACLI
Use this procedure to save the current configuration to a specific TFTP server.
Fundamentals of ERS 3500 Series March 2014 47
To Next Page
Loading...
